Grandio Ascent 8x8 KIT, Руководство пользователя

Страница: 31 / 48

606-WS
PC sheet
L08C
GRANDIO
T I P
Make sure the UV coated
side of the panel faces
outward as indicated on the panels. Avoid
placing the polycarbonate panels in the sun
or near plants until fully assembled.
602A
4.16
Install plastic strip 606 before inserting
polycarbonate sheet Y7’s.
4.17
After Y7’s are installed, loosen bolts attached
to L08C-X in all upper corners. Using a level, adjust
602A and tighten bolts. Repeat in every corner
until the greenhouse is level. The top edges of Y7’s
will align when greenhouse is level.
S04/ML01
L08C-X
609
Loosen
4.15
Install plastic strip 606-WS before inserting
polycarbonate sheet Y6’s, see . You will attach
the Y6-CAP’s to the top of each Y6 prior to
installation see . Install all Y6 panels into the
channel’s of the side walls, and fit down into the
606-WS.
4.16
After Y6’s are installed, loosen bolts attached
to L08C-X in all upper corners. Using a level, adjust
602A and tighten bolts. Repeat in every corner
until the greenhouse is plumb. The top edges of
Y6’s will align when greenhouse is level or plumb.
See .
OUTSIDE
606-WS
L08C
Y6-CAP
Y6-Panel
OUTSIDE
MIDDLE ASSEMBLY CONTINUED
Y6
Y6
Y6
Y6
Y8
Y8
30
STEP F
OUR
Y6
Y6
Y6
Y6