Grandin LD32CVB16, Инструкция по эксплуатации

Страница: 57 / 76

Basic Operation
Channel Selection
• Using the
on the panel of TV or CH+/CH- on the remote control.
Press CH+/
∧
to increase channel number.
Press CH-/
∨
to decrease channel number.
• Using 0- 9 digital buttons.
You can select the channel number by pressing 0 to 9. (In ATV, DTV mode)
• Example
To select a one-digit channel (e.g. Channel 5): Press 5.
To select a two-digit channel (e.g. Channel 20): Press 2 and 0 in a short time.
Volume adjustment
■ Press the
+ / -
on the panel of TV or
VOL+/VOL-
on the remote control to adjust the
volume.
•
If you want to switch the sound OFF, press the .
•
You can release mute by pressing the again or by increasing the volume.
Information display
•
Press the
INFO
button on the remote control to display information about the current
program.
Selecting an input source
You can select the input source by pressing the
SOURCE
button on the remote control.
Press the▲/▼button s to cycle through the input sources, and press the
ENTER
button
to confirm your choice.
Enter
15
/