WUXI CHARTER MACHINERY MANUFACTURE CO., LTD
LP GAS Connections
Connect the hose and regulator (Not included in the grill package, should purchase it from local store) to the gas
inlet at the right hand side of the back grill. The gas inlet of the barbecue is 5/8 UNC male flare fitting (Figure
07&08). Do not subject the hose to twisting. Secure all joints spanner (wrench) tight but do not over-tighten.
Check for leaks as per leaking test procedure.
Grills set up for LP gas come equipped with an LP hose/regulator assembly for connection to a standard 9kgs. The
most flexible arrangement is a portable LPG/propane gas cylinder
attached by a special hose and regulator to your barbecue. Although the
cylinder needs to be refilled or exchanged when empty, this installation
has the advantage of being more mobile, and not requiring the services of
a licensed gas fitter.
Recommended minimum LPG cylinder capacity for use with this
appliance is 4kg. Maximum LPG cylinder capacity for use with this appliance is 10kg.
CAUTION!
Before connecting LP cylinder to regulator, check that all grill burners are in the OFF position and open grill lid.
WARNING
DO not change the regulator/hose assembly or use any other assembly than the one supplied with your
grill.
DO not store a spare LP-gas cylinder under or near this appliance.
Never fill the cylinder beyond 80 percent full.
If the information above is not followed exactly, a fire causing death or serious injury may occur.
7
8
