Page
4
※
Setting instruction:
Setting for EX0101-N114-000:
Status of SET
Function
00 RS232(default)
01 ARC
connection
10
Upgrade for MCU
11
Upgrade for Valens
Setting for EX0101-N104-000:
Status of EDID
Function
XXX0 Normal
model
XXX1
Long Cable model
000X
Copy from the sink
001X 1080P
3D
stereo
010X 1080P
stereo
011X 1080i
stereo
100X 1080P
5.1
101X 1080P
7.1
110X
Upgrade for MCU
111X
Upgrade for Valens
Update instruction:
※
①
The user should receive a Firmware burn package, containing all software
needed for burning and updating the Firmware on the EEPROM.
②
Connect an RS232 cable from RS232 port of unit to PC.
③
Power the unit.
④
Extract the zipped file from the burn package to a directory (e.g.
C:\dir_name).
⑤
Browse to the directory (e.g. C:\dir_name\) and double click the batch file
UpdateSource. Bat (for EX0101-N104) or UpdateSink.bat (for
EX0101-N114).
⑥
A short description of the link created between the PC and the board
appears on the screen, followed by the burn progress percentage report.
⑦
A second stage of verifying the content of the EEPROM follows, also with a
progress percentage report.
※
For RS232 control signal transmission, just connect two RS232 cables to both RS232
ports of EX0101-N104 and EX0101-N114, they work like an RS232 extension cable.
