Always install the appliance directly against the wall.
With the front leveling legs, the cabinet can be leveled so that it stands completely
straight, even if there is any unevenness in the floor.
After definitive placement of the cooling cabinet it should not be connected to power for
the duration of at least 12 hours, the compressor may be damaged if this instruction is
not followed.
ELECTRICAL CONNECTION
1.
Only operate the appliance with alternating current (AC).
2.
The permissible voltage and frequency are indicated on the type plate.
The position of the
type plate is shown in the section entitled Description of the appliance
3.
The socket must be properly earthed and protected by a circuit breaker. The tripping
current of the CB must be between 10 A and 16 A
4.
The socket must be easily accessible
5.
Do not connect the appliance using an extension cable or extension socket
6.
Do not use stand-alone inverters (conversion of direct current to alternating/three-phase
current) or energy-saving plugs as this would increase a risk of damage to the electronic
control system.
