Grand Cru 36D, Инструкция по эксплуатации

Страница: 7 / 18

6
open the door from the right, follow the instructions “Reversing the door swing of
your appliance?”
Installation of Your Wine Cooler

The appliances are designed to be built-in or recessed or free standing installation.

Place your Wine Cooler on a floor that is strong enough to support it when it is
fully loaded. To level your Wine Cooler, adjust the front leveling leg at the bottom
of the Wine Cooler.

Locate the Wine Cooler away from direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat
sources may increase electrical consumption. Extreme cold ambient temperatures
may also cause the unit not to perform properly.

Avoid locating the unit in damp areas.

Plug the Wine Cooler into an exclusive, easily accessible plug socket. Any questions
concerning power should be directed towards a qualified electrician or an
authorized service centre.

The air vent at the front of the appliance must never be covered or blocked in any
way.

The appliance must be installed to all electrical, plumbing, water and drain
connections in accordance with state and local code
Cabinet Opening Dimensions (min)
Model
GC36D
Width
60cm