Gram FS 230, Инструкция по эксплуатации

Страница: 9 / 32

9
There has been a power failure, the
power to the cabinet has been
disconnected or the temperature in the
freezer has been higher than the set
temperature for more than 2 hours.
Interrupting an alarm
The acoustic alarm can always be
interrupted by opening the door and
pressing any button.
An alarm code will be displayed even
though the reason for the alarm no
longer exists. To remove the alarm
code, press buttons (6) and
(7) simultaneously for about 4
seconds. An acoustic alarm cannot
then be given for the next 2 hours.
GB
9 9
9 9
9
8 8 8 8 8
Alarm
Normal use of the freezer may give rise
to various disruptions with unstable
cabinet function as a consequence.
These disruptions are shown on the
display by means of an alarm code (an
E followed by a number), and an
acoustic signal is given.
In case of several faults, the alarm
codes will be displayed in turn.
Alarm codes
E2 - Temperature sensor fault
E4 - Open door
E5 - Temperature too high
E6 - Temperature too high at power
failure
E2
One of the temperature sensors has
been damaged. Call service. A built-in
emergency program attempts to
maintain an acceptable temperature
until the fault is corrected.
E4
The freezer is open for more than 2
minutes. The alarm code disappears
when the door is closed.
E5
The temperature in the freezer has
been higher than the set temperature
for more than 2 hours.
E6