Gram FD 410 SERIES, Руководство по эксплуатации

Страница: 20 / 56

20
4. Press
key for confirmation, balance can be back to normal weighting
mode.
TEMPERATURE SETUP
1. Press
key,
“CEnTIg” displays.
2. Press
key, default
“20” temperature value displays (or the
temperature value set last time displays). If the referential liquid’s
measured temperature is lower than the displayed temperature, press
key to reduce till the reading is same as the referential liquid’s
measured temperature. If the referential liquid’s measured temperature
is higher than the displayed temperature, press
key to increase till
the reading is same as the referential liquid’s measured temperature.
3. After setting up temperature, press
key, value flickers, press
key for confirmation, Temperature Setup is over.
STATE OF gOAL ObjECT SETUP
Before density measurement, please set up the State of Goal Object, steps
are as follows:
1. Press
key,
“CEnTIg” displays;
2. Press
key,
“ShAPE” displays;
3. Press
key,
“SOLID” displays;
Remarks:
If measuring solid’s density, press
key for confirmation after step
(3), State of Goal Object Setup is over; If measuring liquid’s density,