765041782
Rev. 002
13
Temperature setting
Set the desired cabinet temperature in the following manner:
It is important to make sure first that the keyboard is not locked. See how in the section
below on keyboard locking.
Press the
key. The compressor lamp
blinks, and the current cabinet
temperature setting is shown in the display. This indicates that the current temperature
setting can be changed now in the following manner:
Press
or
to raise or lower, respectively, the temperature setting to the
desired level.
Once the desired cabinet temperature has been set, press the
key again to save
the new value. The compressor lamp
will go out, unless the compressor is running.
Alternatively, by not touching the keys for a minimum of 15 seconds, the controls will
switch back to the normal temperature display, and the value that has been set will be
saved automatically.
In the event of an interruption to the power supply, the controls will remember the
temperature setting, and the product will start up again when the power comes back.
Keyboard lock
The keyboard is automatically locked when it has not been used/operated for 30
seconds. This secures the product against unauthorised/inadvertent changes to the
settings or switching off of the controls.
To unlock the keyboard:
Briefly press
. If the display subsequently shows
Loc
then the controls are locked.
To unlock the controls, press any key for approx. 3 seconds, until the display shows
UnL
.
The display is now unlocked and new settings can be entered.
Содержание ECO MIDI FG 60 G
Страница 1: ...765041782 Rev 002 1 ECO MIDI KG FG User manual ...
Страница 25: ...765041782 Rev 002 25 Wiring diagram ...
Страница 26: ...765041782 Rev 002 26 ...