Gram 866100635 Скачать руководство пользователя страница 10

 

 

- 10 - 

765041559 

Rev. 002

 

 
 

 
Thank you for choosing a quality product from Gram Commercial. 
 
This manual will advise you how to install, use and maintain your new product. 
 
Before our products leave the factory, they undergo a full function and quality test. 
 
Should you nevertheless experience problems with the product, then contact your local dealer. Gram 
Commercial representatives and dealers placed all over the world are ready to help you. 
 
Please refer to your dealer for information about the warranty coverage of your new Gram product. 
 
Any warranty is subject to correct use according to specifications in this user manual, where e.g. common 
maintenance and eventual repairs are carried out by authorized technicians with proper knowledge of the 
product and only using original spare parts. 
 
Changes in installation and other use of the product than prescribed in this manual, might affect the 
operation and durability of the product. 
 
The manual is written according to our current technical knowledge. We constantly work on updating this 
information, and we reserve the right to make technical changes. 
 
 
 

Intended use 

 

 
The product is designed for professional storage of foodstuff at a constant temperature.  

The product is not be used for chilling down or freezing in foodstuff. 

The product is only to be used for the purpose for which it has been expressly designed. Any other use could 
cause that the foodstuff stored in the product are not kept at the correct temperature or even damage the 
product. 

The product is not suited for storing blood plasma, laboratory samples, pharmaceuticals or similar 
substances. The manufacturer will not be held liable or responsible for any damage caused by improper, 
incorrect or unreasonable use of the product. 
 

Содержание 866100635

































Отзывы: