10/12
GrainPro®
Collapsible Dryer Case II™ Instruction Manual
MA4022JMJ0412-8
6.8.
DEFLATING THE AIR TUBE
6.8.1. To remove the air from the air tube, simply
open the two inlet valves.
6.8.2. This will cause the air to freely come out of
the air tube.
7.
MAINTENANCE AND CARE
7.1. REPLACEMENT OF AIR TUBE
7.1.1. When the side wall cannot be inflated, the
air tube inside is damaged. It is
recommended to replace the air tube with
a new one. To replace it, attach one end of
the spare air tube to the old air tube. Then,
old, and new PE air tubes are connected
for pulling.
7.1.2. Carefully pull the other end of the old tube.
The old PE tube releases while the new
PE tube is re-inserted inside the sidewall.
NOTE:
▪
Air tubes are especially designed and
are only available at GrainPro®.
7.2.
REPAIRING PUNCTURES AND OTHER DAMAGES
7.2.1. Use the patching material and adhesive
found in the repair kit:
a. Clean the area to be patched with a
damp cloth or organic solvent.
b. Apply
glue
(150-200g)
on
both
surfaces with a brush or equivalent.
c. Let it dry for 5-10 minutes and stick
and apply sufficient pressure.
7.2.2. Protective maintenance:
a. Check the patched WPE occasionally and replace or re-patch if necessary.
7.3.
CLEANING
7.3.1. Clean the
CDC II™ with soap and water.
7.3.2. Dry under the sun.