SPARGE WATER
HEATER
SPARGE WATER
HEATER
Designed for USE WITH the Grainfather
Sparge Water Heater
Model No: 450045, 450046, 450047
220-240V, ~ 50/60Hz, 2250W
USA/Canada Sparge Water Heater
Model No: 450048
110-120V, ~ 60Hz, 1500W
Made in China
Reorder: 800045 Version 2
SAFETY INFORMATION
READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND SAVE FOR FUTURE REFERENCE.
• Do not touch metal parts of the Sparge Water Heater as they become hot during use.
• Be mindful of hot steam coming from the lid vents.
• Do not leave electrical appliances unattended when in use.
• Always put the sparge water heater on a clean, level surface that can withstand the weight of
the urn – filled with water.
• Always switch off and disconnect from the mains supply before cleaning or when not in use.
• NEVER attempt to move the Sparge Water Heater when it is full of hot (or cold) water.
• Do not allow it to be immersed in liquid.
• Do not attempt to disassemble the Sparge Water Heater – there are no user serviceable
parts inside.
• Do not position the urn so that the tap hangs over the counter edge as it could lead to serious
scalds should the tap be switched on by mistake.
• ALWAYS disconnect from the mains supply and allow the water to cool completely before
attempting to clean or descale.
• NEVER OVERFILL.
• Do not allow cold water to sit inside for more than 2 days as it could stagnate, which is
very unhygienic. Empty the water out completely and refill if it has stood idle over a couple
of days.
• Your appliance must never be switched on through an external timer or any kind of separate
remote control system.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliances by a dedicated person who
has been trained and qualified.
• Children should be supervised to ensure that they do not play with the appliance.
POWER SUPPLY
• If the unit uses a mains supply, ensure that the plug is securely inserted into the mains
socket and it is easily accessible.
• Protect the power lead from sharp objects, excessive heat and damp or wet locations.
• Check the power lead periodically, and replace if damaged.
• Check that the voltage on the rating plate of your product corresponds with your local
electricity supply which must be AC (alternating current).
• Any repairs should only be carried out by a fully qualified electrician or an authorised
service agent.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard
.
Intertek
Z988
adjustable thermostat
L
N
E
manual thermostat
thermal link
keep warm lamp
heating lamp
heater
switch
ELECTRIC CIRCUIT DIAGRAM
Z988
