02002183 Revision A, January 2006
Metro Power
III
Owner’s Manual
6
Warning: Do not switch programmer into PROGRAM mode while wheelchair is mov-
ing.
Warning: Do not disconnect the wheelchair batteries while the programmer is con-
nected to the integral controller.
Warning: Do not use any adaptive control devices other than those provided or rec-
ommended by Everest & Jennings.
Warning: Do not connect accessories to the batteries; it will decrease driving range
and shorten battery life. Do not connect AnYTHInG to only one battery; this will
cause premature battery failure.
Warning: never connect a respirator or other life-support device to the wheelchair
batteries, since it will shorten the battery operating time. This could cause an unan-
ticipated failure of both the wheelchair and the life-support equipment.
Warning: unauthorized modification could create a hazardous condition, which could
result in serious injury.
Warning: The use of non-Everest & Jennings replacement parts could create a haz-
ardous condition, which could result in serious injury.
Warning: standard weight capacity for the Metro Power III wheelchair is 250 pounds
(113 kg).
Warning: Do not tow any loads or “piggyback” passengers or heavy packages.
Warning: Keep all cables away from the moving parts of the wheelchair.
Warning: As a safety feature, this wheelchair is equipped with fail-safe electrome-
chanical park brakes. Any interruption in the power supply will cause these brakes
to immediately engage and stop the wheelchair. If the occupant is not properly
positioned, an unanticipated stop could pitch the occupant forward and out of the
wheelchair. Review the owner’s manual and consult with your dealer regarding
proper positioning and use of this wheelchair.
Warning: Everest & Jennings specifically disclaims responsibility for any bodily
injury or property damage which may occur during any use which does not comply
with federal, state or local laws or ordinances.
