4.
When the year setup is finished, the month number will flash automatically.
Follow the same instruction as above to set month, date and time;
5
.
Press button ‘ ’ to finish the setup. If you wish to change the date
and time, repeat steps 2,3,4.
Note: When under the mode of Date/Time setting without any
operation, the device will automatically return to standby mode after
one minute.
SETTING THE DATE AND TIME
This function provides accurate measuring time for
each measurement. To get an accurate date and time,
preset the date and time correctly before the first use
of this device.
The operation procedure for presetting Date/Time is
as follows:
1
.
When the device is connected to power supply at
first, the display will show as in Fig.3;
2
Press and hold the button ‘M1’, then press the
button ‘ ’ , and the year number flashes as
shown in Fig.4;
3
.
Press button ‘M1’,or ‘M2’ to subtract or add the
number, and press button ‘ ’ for confirmation;
Fig.3
Fig.4
10
Содержание LUMISCOPE 1133
Страница 19: ...DATE SYSTOLIC mmHg DIASTOLIC mmHg PULSE beats minute BLOOD PRESSURE RECORD 19...
Страница 25: ...MONITOR DE PRESI N ARTERIAL DIGITAL AUTOM TICA Modelo 1133 Manual de instrucciones 1133 INS LAB RevD20...
Страница 43: ...FECHA SIST LICA mmHg DIAST LICA mmHg PULSO latidos minuto DIARIO DE PRESI N ARTERIAL 43...
