GF6580B-1-INS-LAB-RevC10
3
Foot End Crossbrace Installation
1. Locate the two foot deck
angle slots on either side
of the bed closest to the
bed's foot end (see near
right picture).
2. Position the foot end
crossbrace so it ex-
tends across the bed. Ensure the stabilizers remain at the bottom of the crossbrace and rotate the
rail guides so the long ends face upward and the spring buttons face the bed's foot end, as shown in
above center picture.
3. Insert one of the crossbrace stabilizers into the slot across the bed from you. Compress the spring-
loaded crossbrace until the second stabilizer aligns with the slot closest to you and lower it into the
slot. Slowly release crossbrace until it locks into place.
4. Rotate the crossbrace so the long ends of the rail guides face downward and the spring buttons face
the bed's head end, as shown in above far right picture.
Foot End Pivot Point Crossbrace Installation
1. Locate the two foot
deck angle slots on
either side of the bed
closest to the bed's foot
end pivot point (see
near right picture).
2. Position the pivot
crossbrace so it extends
across the bed. Ensure
the stabilizers remain at the bottom of the crossbrace and rotate the rail guides so the long ends face
upward and the spring buttons face the bed's head end, as shown in above center picture.
3. Insert one of the crossbrace stabilizers into the slot across the bed from you. Compress the spring-
loaded crossbrace until the second stabilizer aligns with the slot closest to you and lower it into the
slot. Slowly release crossbrace until it locks into place.
4. Rotate the crossbrace so the long ends
of the rail guides face downward and the
spring buttons face the bed's foot end, as
shown in above far right picture.
Foot Rail Installation
1. Align the two legs of each rail over the
crossbrace rail guides. Ensure the outer
telescoping rail tubes are facing the bed's
head end and the rail rivet stops are fac-
ing outward, as shown at right.
2. Gently pull out the spring buttons and
lower the rail until both buttons click
into position in the first holes on both
rail legs, locking down the rail.
WARNING: Ensure the outer telescoping
rail tubes face the head end of the bed
as shown at right; if positioned other-
wise, a pinch point could occur when
bed is raised or lowered.
foot deck angle
foot end
locate foot
end slots
head end
foot end slot
detail area
spring
button
long end
stabilizer
anti-slide tab
rail guide
foot end slot
head end
detail: install
foot end
crossbrace
head end
detail: foot end
crossbrace
installed
rail
guide
spring button
pivot point
crossbrace
foot end pivot point slot
foot end pivot point
foot deck angle
foot end
locate foot end
pivot point slots
head end
detail area
stabilizer
rail
guide
long
end
anti-slide tab
spring button
head end
detail: install foot
end pivot point
crossbrace
foot end pivot
point slot
head end
detail: foot end
pivot point
crossbrace installed
spring
button
rail guide
foot end pivot
point crossbrace
foot end
head end
right
side
left
side
pivot point crossbrace
foot end crossbrace
right rail outer
telescoping tube
rail rivet stops face outward
left rail outer telescoping tube
spring buttons face each other
quarter rails
installed as foot rails
foot end rail guide
pivot point rail guide
