LCMP100-INS-LAB-RevB19
2
1.770.368.4700
Information contained herein is subject to change.
The most current and complete product information can be found on our website.
www.grahamfield.com
© 2017, GF Health Products, Inc. All Rights Reserved.
Lumex is a trademark of GF Health Products, Inc.
GF Health Products, Inc. is an ISO 13485 Certified Company.
Manufactured for GF Health Products, Inc.
Made in Taiwan
2. Place the air mattress on top of the bed mattress. Ensure the air mattress lies completely
flat without any kinks. Place "FOOT END" of air mattress toward foot end of bed.
3. Connect air hoses to pump and air mattress — hose ends with fittings connect to air
mattress. Ensure air hoses are not kinked and will not be pinched by any articulated bed
mechanisms.
4. Ensure green Power switch is in the OFF position, then plug pump into a properly
grounded wall outlet. (Verify power to this outlet is not controlled by a wall switch).
5. Press green Power switch to the ON position. Air will begin to flow into mattress.
6. Yellow LED illuminated indicates that air pressure is low and air mattress is not fully
inflated; the green LED will automatically illuminate when proper air pressure has been
reached and the air mattress is ready for patient placement.
Info: Each time the air mattress is inflated, set the Comfort Control Knob pressure to
"MAX.", after which the user can adjust the mattress to desired firmness.
MAINTENANCE AND CLEANING
Refer to user manual included with mattress system for this information.
