background image

DSLSA1-INS-LAB-RevA09  

1

DSLSA1, DSLSA2, DSLSA3, DSLSA4; DELUXE SIT-TO-STAND 
PADDED SLING: APPLICATION INSTRUCTIONS
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE USE

Note: The most current version of these instructions can be found online at 

www.grahamfield.com

 WARNING: Important! Read and understand these instructions before assembling or us-

ing the Sit-to-Stand Sling. If you do not understand any part of these warnings, cautions 
or instructions, contact a healthcare professional for direction in the use of this product. 
If the Sit-to-Stand Sling is not properly applied, personal injury and damage to the Sit-to-
Stand Sling could result.

 WARNING: If components are damaged or missing, contact your dealer immediately.

 WARNING: Carefully inspect the sling weekly for wear and damage to seams, fabric, 

straps, and strap loops. Torn, cut, frayed or broken slings can fail, resulting in serious 
personal injury to the user. Use only slings that are in good condition. Discard and de-
stroy old, unusable slings.

 WARNING: DO NOT exceed the Sit-to-Stand Sling's maximum weight capacity.

 WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury 

caused by improper application or use of this product.

APPLICATION

1.  Check the patient's weight and the sling's 

maximum weight capacity. Ensure that the 
patient's weight does not exceed the sling's 
maximum weight capacity.

2.  Review the following procedures carefully before 

attempting lift; call Graham-Field Technical 
Support at 800-347-5678 with any questions.

3.  See the Sling Loop Options table at right to 

determine the appropriate position.

4.  See Figure 1 for correct positioning of sling on 

spreader bar.

5.  Position the sling behind the seated patient, with 

the two red pads under the arms, as shown in 
Figure 2.

6.  Cross the padded belt over the patient's chest 

and stomach area and secure it with the snap 
buckle belt as shown in Figure 2.

7.  Loop straps A and B through black strap C as 

shown in Figure 3, and hook to corresponding 
mast hooks a and b as shown in Figures 1 and 4.

Sling Loop Options

Long loop

reclined position

Center loop

semi-reclined position

Short loop

most upright position

Long loop

Center loop

Short loop

Figure 1
A

B

a

b

C

Figure 2

Figure 3

Figure 4

Отзывы:

Похожие инструкции для Lumex DSLSA1