ASSEMBLY
1.
Carefully remove components from box.
2.
Install back and arm assembly on base and seat frame assembly by
inserting back tubes into base frame tubes. If necessary loosen, but
do not remove, knobs.
3.
Tighten knobs at rear seat until secure — do not overtighten.
4.
Install footrests on base frame footrest brackets. Lock footrests into place.
5.
Slide the commode pail in under the seat from the back
NOTE:
Before use, ensure all components are securely installed and
VersaMode is assembled as described above.
DROP ARMREST
The VersaMode armrests drop to facilitate transfer. To drop the armrest,
pull the release lever outward until the armrest releases, lift the armrest up
out of the socket, then swing it downward.
LOCK REAR CASTERS
The rear casters lock into place to prevent movement. To lock, step on the
rear pedal until it latches. To unlock, step on the rear pedal until it unlatches.
SWING AWAY / REMOVE FOOTRESTS
The VersaMode footrests swing away or detach to facilitate transfer. To swing
the footrest away, depress the footrest release lever and swing it out of the
way. To remove the footrest, swing it away, then lift it up off the brackets. To
lock the footrest in place, swing it in toward the center of the VersaMode until
it locks into place.
