9
JB0112-014-INS-LABRevB07
8. CLEANING INSTRUCTIONS
Clean Collection Bottle:
1. Turn off the suction unit and allow vacuum to drop, then disconnect AC power source.
2. With the collection bottle still in the holder, remove the collection bottle lid. The bottle can
now be taken out of the holder to be emptied.
NOTE:
Collection bottle should be emptied after each use.
3. Collection bottle should be thoroughly cleaned after each use by one of the following three
methods:
a. Wash in a hot water/dishwashing detergent solution and rinse with clean, hot tap water. Then
wash in one part vinegar to three parts hot water solution. Rinse with hot tap water and air dry.
b. Wash with rubbing alcohol and air dry
c. Wash with a commercial (bacterial-germicidal) disinfectant; follow disinfectant manufacturer's
recommended instructions and dilution rates carefully.
Clean Suction Unit and Collection Bottle Lid:
1. Disconnect the suction unit from all external power sources.
2. Wipe the suction unit housing and collection bottle lid with a clean cloth and any commercial
(bacterial-germicidal) disinfectant.
CAUTION
Do not submerge unit in water as this will result in severe damage to the vacuum pump.
Collection Bottle Lid
Holder
Collection Bottle
