GD-450-525-INS-LAB-RevA21 • Regency 450 / 525 User Manual
8
Installing the Headrest and Pushbar (Reclining Models Only)
After the wheelchair has been fully unfolded and opened:
1. Install headrest as shown at above left: slide headrest down onto headrest support assembly as
shown.
WARNING: Ensure headrest is fully seated and securely installed before use.
2 Install headrest cover, shown at above right.
3. Install push bar as shown at above right: push bar into pusher handles until spring buttons
lock into place.
WARNING: Ensure both spring buttons are fully extended through the push bar before use.
WARNING: DO NOT use reclining wheelchair without both headrest and push bar installed.
4. To adjust the back angle, grasp both pusher handles securely and pull up on both release levers
simultaneously. Gently lower or raise the back to the desired height, and release the levers.