5
Always on
Target
Graflex, Incorporated
1.0 Introduction
1.1
Overview
The PTC80 Controller may be used to control any of the Graflex family of Pan & Tilt
Heads. The Graflex PT150, PT90E , PT75and PT40E Pan & Tilt Heads may be controlled by
the PTC80. The functions controllable by the PTC80 include:
•
Manual pan & tilt motion
•
Presets, 10 each
•
Sequencing: 2 each (Presets 1-5 and Presets 6-10)
•
Zero pan & zero tilt
For further information, contact:
Graflex, Incorporated
Voice: 561-691-5959; Fax 561-691-5983
15855 Assembly Loop, Suite 100
email: [email protected]
Jupiter, Florida 33478 USA
Figure 1.1
An interface diagram of the PTC80 connected to a PT75 is shown in Figure 1.1
below
1.2
Interface Diagram
12 VDC
24 VDC
