GRAFENTHAL GmbH - User Manual UPS
PR-1000/-1500/-2000/-3000
- 6 -
Step 5: Disable and enable EPO function
Keep the pin 1 and pin 2 closed for UPS normal operation. To activate EPO function, cut the wire
between pin 1 and pin 2.
Step 6: Turn on the UPS
Press the ON/Mute button on the front panel for two seconds to power on the UPS.
Note: The battery charges fully during the first five hours of normal operation. Do not expect full
battery run capability during this initial charge period.
Step 7: Install software
For optimal computer system protection, install UPS monitoring software to fully configure UPS
shutdown. You may insert provided CD into CD-ROM to install the monitoring software. If not,
please follow steps below to download and install monitoring software from the internet:
1. Go to the website
http://www.grafenthal.com/service-support/download-center/
2. Click
GRAFENTHAL
®
USV Management
icon and then choose your required OS to download the
software.
3. Follow the on-screen instructions to install the software.
4. When your computer restarts, the monitoring software will appear as an orange plug icon located
in the system tray, near the clock.
Step 8: External battery connection (for long-run models only)
Follow below chart to make external battery connection.
It’s in closed status for UPS
normal operation.
