___ __
EVA16 System Controller Rel. 1.03.10 - startup guide, english, page 4 -
12/2017
Function of the button [ buzzer
on
/
off
] : The function of the button depends on the
configuration / position of the DIP-switch -2- on the back panel of the terminal
2 = ON:
the buzzer is deactivated / muted. There is no function for this button
2 = OFF:
buzzer is enabled, pressing the button in case of error will mute a sounding buzzer
[ NOTICE : the buzzer cannot be reactivated until the system is completely free of errors !
Does the same error occur again (or another error) after the system was clean, so the buzzer will sound again ]
The MAG TER terminal station allows the activation of special functions by the use of the cover-protected keys. To
use this functions the sliding cover must by pushed down. This protection will automatically close again (two built-in
springs) after release. So, these keys always are protected against unintended activation.
to reach the
key access:
move cover
downwards
Cover handle
Pushing the button
“TEXT 1” sends the
corresponding
audio-file once to
the preprogrammed
zones
Pushing the button
“ALARM 1” sends
the corresponding
audio-file
permanently to the
preprogrammed
zones.
A second push
stops the ALARM
Pushing the button
“TEXT 2” sends the
corresponding
audio-file once to
the preprogrammed
zones
While pressing the
EMERGNCY CALL
a high priority call
will be transmitted
into all connected
speaker lines