Graef EM80, Инструкция по эксплуатации

Страница: 7 / 9

7
EN
Requirements for the installation location
For safe and flawless operation of the unit, the
place of location must meet these prerequisites:
•
The unit must be set up on a firm, flat, level,
non-slip and heat resistant base that has
sufficient load bearing capacity.
•
Select the place of location so that children
cannot reach the hot surfaces of the unit.
•
The unit is not intended for installation in a
wall or a built-in cupboard.
•
Do not set up the unit in a hot, wet or moist
environment.
•
The electric socket must be readily
accessible so that the power cord can be
easily unplugged.
Before the first use
Clean all parts as described in “Cleaning”.
Operate the appliance 2 times to get rid of any
possible residue. Do not drink this espresso.
Preparing 3 cups
•
Fill water into the lower container up to
mark „3“.
•
Place the 6 cup filter basket into the lower
container.
•
Place the 3 cup filter basket into the 6 cup
filter basket.
•
Fill it brimfull with loose espresso powder.
Smooth out the filling, do not press the
powder into the filter on any account.
•
Remove any powder from the rim in order to
close the seal optimally.
•
Screw the upper container on the lower
container, turn it clockwise.
•
Place the appliance on the base station.
Never place the appliance on a hotplate.
•
Plug the plug into the electric socket.
•
To start the brewing process, switch on the
ON- Off switch.
Never open the lid during boling process.
•
Brewing process is completed when