6
Only use whole coffee beans.
●
●
Select the grind by turning the grind
adjustment collar to the desired setting.
●
●
To grind coffee, set the switch to the ‘On’
position.
●
●
When the desired amount of coffee has been
ground, set the switch to the ‘Off’ position.
Remove the coffee grounds container.
Grinding coffee directly in the group handle
●
●
Use the small or large group handle bracket.
●
●
Hold the group handle between the group
handle bracket.
●
●
Select the grind setting by turning the grind
adjustment collar to the desired setting.
●
●
Set the switch to “ON”.
●
●
The coffee grounds flow into the group
handle.
●
●
When the group handle is full, pull it back.
●
●
Set the switch to the “OFF” position.
Grinding coffee directly in the group handle
using
and
buttons
●
●
Hold the group handle between the group
handle bracket.
●
●
Set the switch to the ‘Auto’ position.
●
●
Press
for one cup or
for two cups.
●
●
When the grinding has stopped, remove the
group handle.
Notice: You can always end up the grinding by
pressing the selected button (
or
).
How to program
and
grind amount
If the presetting won´t satisfy your demand,
you can change it by pressing the
„P“ button.
●
●
Hold the group handle between the group
handle bracket.
●
●
Set the switch to the ‘Auto’ position.
●
●
On the control panel, press and hold the
„P“
button for a period of 2 seconds - all three
buttons will flash once indicating you have
activated program mode. Remove your finger
from the
„P“ button.
