Grady-White Boats Freedom 275, Руководство пользователя

Страница: 62 / 87

2 7 5 F
R E E D O M
8–10
H
EAD
O
PERATING
I
NSTRUCTIONS
Marine Head (w/ Hand Pump) Operation
1. Open the marine head inlet seacock by pulling up on the remote arm. This seacock is in the
forward bilge and is labeled “Head Inlet”. It can be accessed through the access plate in the
rigging lid between the consoles.
2. Position the wet/dry bowl selector in the wet bowl setting. Fill the toilet with water by
pumping the handle several times.
3. Flush the toilet by pumping the handle several more times in the wet bowl position.
4. Move the bowl selector to the dry bowl position and pump the handle until almost all of the
water is removed. Leave the toilet in the dry bowl position when not in use.
Electric Marine Head Operation
1. Open the marine head inlet seacock by pulling up on the remote arm. This seacock is in the
forward bilge and is labeled “Head Inlet”. It can be accessed through the access plate in the
rigging lid between the consoles.
2. Flush the toilet by turning the flush control knob clockwise on the pump beside the bowl.
Turn the flush control knob counter clockwise to remove most of the water from the bowl.
Emptying Marine Head Holding Tank By Overboard Discharge
1. Open the marine head discharge seacock by pulling up on the remote arm. This seacock is in
the forward bilge and is labeled “Head Disc”. It can be accessed through the access plate in
the rigging lid between the consoles.
2. Press the show level button on the tank level monitor.
3. Press the pump-out button until the pump energizes. When the light on the monitor indicates
the tank is empty, the pump will shutoff.
4. Close the discharge seacock.
Emptying Marine Head Holding Tank Through Deck Pump-out
1. Remove the cap from the deck pump-out fitting located on the port gunwale forward of the
windshield.
2. Connect a vacuum hose from a pump-out station to the deck fitting and run until the tank is
empty. Replace the cap on the deck pump-out fitting.
See “Marine Head” on page 8–26 for a layout diagram.
Portable Head With Deck Pump-Out
Using Deck Pump-out Fitting
1. Remove the cap from the deck pump-out fitting located in the starboard walkaround.
2. Connect a vacuum hose from a pump-out station to the deck fitting and run until the reser-
voir is empty. Replace the cap on the deck pump-out fitting.
N O T I C E
Overboard discharge seacock must be secured in the “closed” position in accordance with the
laws in your boating area.