Grady-White Boats Express 330, Руководство пользователя

Страница: 79 / 128

3 3 0 E
X P R E S S
8–15
Cockpit Shower
To operate the cockpit showers located in the port rigging station and in the motorwell near
the transom door, the water pressure switch located on the DC panel must be in the "on"
position. Pull out the hose and depress the lever on the back of the wand to spray water. For
continuous or hands free operation, pull up on the lever until it reaches the locked position. To
reinstall the shower wand on the port rigging station faucet, gently feed the hose down
through the deck and return the faucet to the base. For the shower in the motorwell, simply
feed the hose back into the deck and allow the faucet to rest in the storage cup. To supply the
optional hot water to the cockpit showers, make sure the hot water heater is on
(reference
“Water Heater” on page 8–14) , then adjust the mixer knob located at the cockpit showers.
Cockpit Switch Panels
These panels are located at the helm and in the cockpit near the livewell. These panels are
used to operate those systems which are not included on the AC/DC panel. The switches are
backlit for low light situations and have individual breakers located above them. Refer to
“Switch Panel” on page 8–2 for information regarding the operation of switches included on
this panel.
Freshwater Washdown
To operate the freshwater washdown, depress the water pressure switch on the accessory
switch panel. This system will now be pressurized at the “freshwater” washdown outlet. A
hose with a spray nozzle attached may be used intermittently without turning the switch off in
the same fashion as a home garden hose with a nozzle. The freshwater pump has an internal
pressurization switch that will maintain water pressure as needed until the switch is turned off
at the switch panel.
Head Shower
To use the head shower, the “WATER PRESSURE” switch located on the DC panel must be
activated. This provides pressure to the hot and cold water supplies. Water flow is controlled
by the head shower fixture and a conservation valve built into the pull out wand.
Livewell - Raw Water
To operate the livewell, open the seacock with the livewell I.D. tag located beneath the center
lid in the aft berth. The livewell pump is screwed directly into this seacock. The livewell
switch at the helm should be in the "on" position. Place the livewell standpipe in the drain
located at the bottom of the livewell. Screw it down until the black flange makes contact with
the flange on the drain fitting. Water will enter through a plenum along the side of the livewell
and be distributed through a series of holes arranged vertically along the plenum. The water
will rise to a depth even with the strainer on the standpipe and drain overboard. To evacuate