7
INS TALLING BATTERIES
The Transmitter and Receiver are each powered by a 9 V alkaline battery. Battery life is approximately 8 hours of operating time.
For installing batteries into the Transmitter and Receiver
:
1.
Remove the Battery Compartment Cover by pressing down and sliding the compartment in the direction of
the arrow�
2.
Place the cap snuggly over the battery
terminals�
3.
Place the Ribbon on the bottom of the
compartment with enough temporarily draped
over the edge so it can be tugged to dislodge
a spent battery later�
4.
Place the battery and cap into the
compartment making sure that it is fully
seated�
5.
Replace the Battery Compartment Cover� Make sure the cover slides into place easily�
6.
Note
:
To avoid possible damage, batteries should be removed if the unit will not be used for a lengthy amount of time�
7.
Alternatively, the receiver can be powered by a 9 V DC power supply (not included)�
