Graco VIBRA-FLO 17P002, Операция, Запчасти

Страница: 4 / 12

VIBRA-FLO Shaker Adjustment
4 3A4696B
VIBRA-FLO Shaker Adjustment
The VIBRA-FLO shaker is shipped preset for
the best performance. The speed is adjusted
by adjusting the VIBRA-FLO knob on the
control.
1. Turn VIBRA-FLO shaker ON/OFF
switch to the ON position.
2. Turn VIBRA-FLO knob to maximum.
3. If the VIBRA-FLO shaker is making
excessive noise turn the VIBRA-FLO
knob to a lower setting. Depending upon
the supply voltage the shaker may not
operate if the VIBRA-FLO is set too low.
4. If the armature and coil needs
adjustment, use a feeler gauge to adjust
shaker gap. Set gap to 0.042 – 0.052
inch (1.06 – 1.32 mm).
1
2
3
4
5
ti30652a
ti30206a
ti30151a
ti30152a
ti30153a
ti30154a
ti30155a