Graco ThermoLazer, Операция

Страница: 27 / 40

Screed Box ThermoLazer 300TC/ProMelt (SmartDie II)
3A1319K 27
Adjustment
The height and angle of the screed box can be adjusted
to ensure a solid line of material on any surface. For
optimum delivery of thermoplastic material, make sure
the screed box runner is adjusted as described.
1. Loosen two bolts on screed box mounting bracket.
2. Slide mount down until leading box edge of screed
box runner is just off of the ground surface. For best
performance, raise leading edge .020 in. (0.5 mm)
off ground surface. Scraper blade may be used to
set this depth.
3. Tighten bolts on screed box mounting bracket.
4. Spring position may be moved to a different hole.
The farthest holes provide greatest force to close
the gate.
BURN HAZARD
Make sure to use two hands when picking up screed
box. Place one hand on yoke and one hand on rod.
Do NOT pick up screed box with one hand and/or at
one location.
ti17047b
ti17048b
ti16835a
20 mil
.020˝
0.5 mm
ti16840a
ti17045a
Screed Box
Screed Box Runner
ti16841a