Graco T-Max Applicator 17Z054, Операция - Ремонт - Запчасти

Страница: 10 / 12

Spool Valve Repair
10 312879E
Spool Valve Repair
Before performing any maintenance on applicator, read
all warnings on front cover of this manual and performd
Pressure Relief Procedure , page 4.
Spool Valve Removal
NOTE: Spool (3) and/or seat (36) may be rotated 180°
for extended life if they are not worn through completely.
1. Remove swivel (17), o-ring (7) and seat (36).
2. Remove nut (13), screw (15), washer (14) and
handle (1). Remove plate (2), clip (31) and washer
(30).
3. Remove spool (3) from housing (9).
Spool Valve Installation
1. Apply grease (supplied with Kits 289916 and
289918) to spool, o-rings and bearings and inside of
housing.
2. Assemble o-rings and bearings onto spool. Align
bearing (4a, 4c) gaps away from ports in housing.
3. Install spool in housing. Secure with washer (30),
and clip (31).
4. Install plate (2) onto spool (note location of
orientation hole). Install handle with screw, washer
and nut.
5. Apply grease to o-ring (7). Install seat (36), o-ring
(7) and swivel (17).
Technical Data
Maximum fluid working pressure 1000 psi (6.9 MPa, 69 bar)
Maximum air working pressure 250 psi (1.7 MPa, 17 bar)
Air Requirements 30 scfm (0.84 m3/min) Maximum
Fluid Inlet Size 1 in.(m) cam and groove (Graco HP)
Air Inlet Size 1/4 npsm(m)
Wetted Parts Aluminum, stainless steel, PE, POM, polyurethane, nitrile, nylon, PVC, tungsten carbide
Weight † 2.9 lb (1,3 kg)
Height 5.8 in. (14,7 cm)
Width 7.0 in. (17,8 cm)
Length † 12.7 in. (32,3 cm)
Sound Data without Air (applicator
only):
Sound Pressure Level 84dB(A)*
Sound Power Level 83dB(A)*
Sound Data with Air (applicator only):
Sound Pressure Level 118dB(A)*
Sound Power Level 118dB(A)*
* Spraying simulated acoustical texture under typical conditions as specified by the material manufacturer.
† Airless configuration