manualshive.com logo in svg

Graco ST MAX II 395 PC Pro, Операция, Запчасти, Страница: 5 / 64

Поделиться
Скачать
Graco ST MAX II 395 PC Pro Скачать руководство пользователя страница 5

Warnings

3A6491E

5

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To 

help prevent fire and explosion:

•

Do not spray flammable or combustible materials near an open flame or sources of 

ignition such as cigarettes, motors, and electrical equipment.

•

Paint or solvent flowing through the equipment is able to result in static electricity. Static 

electricity creates a risk of fire or explosion in the presence of paint or solvent fumes. 

All parts of the spray system, including the pump, hose assembly, spray gun, and 

objects in and around the spray area shall be properly grounded to protect against static 

discharge and sparks. Use Graco conductive or grounded high-pressure airless paint 

sprayer hoses.

•

Verify that all containers and collection systems are grounded to prevent static 

discharge. Do not use pail liners unless they are anti-static or conductive.

•

Connect to a grounded outlet and use grounded extensions cords. Do not use a 3-to-2 

adapter.

•

Do not use a paint or a solvent containing halogenated hydrocarbons.

•

Do not spray flammable or combustible liquids in a confined area.

•

Keep spray area well-ventilated. Keep a good supply of fresh air moving through the 

area.

•

Sprayer generates sparks. Keep pump assembly in a well-ventilated area at least 20 

feet (6.1 m) from the spray area when 

spraying, flushing, cleaning, or servicing

. Do not 

spray pump assembly.

•

Do not smoke in the spray area or spray where sparks or flame is present.

•

Do not operate light switches, engines, or similar spark producing products in the spray 

area.

•

Keep area clean and free of paint or solvent containers, rags, and other flammable 

materials.

•

Know the contents of the paints and solvents being sprayed. Read all Safety Data 

Sheets (SDSs) and container labels provided with the paints and solvents. Follow the 

paint and solvent manufacturer’s safety instructions.

•

Keep a working fire extinguisher in the work area.

Содержание ST MAX II 395 PC Pro

































































Отзывы:

Нет отзывов