Graco SaniSpray HP 750, Инструкция по эксплуатации

Страница: 12 / 38

Setup
12 3A7939A
Gun and Hose Setup Options
You will need to determine which gun setup option will
work best for your job. There are two gun setup options
for your sprayer:
•
4-Gun Setup
(see page 13 for image)
•
8-Gun Setup
(see page 14 for image).
Whichever setup you choose, be sure to have an
operator for each gun to be used. A single operator
should never spray more than one gun at a time. Once
you’ve determined your gun setup, proceed to
Connect
Hose(s) and Gun(s)
on page 12.
Connect Hose(s) and Gun(s)
There are two disinfectant outlets (F) on your sprayer.
Each outlet supports one 4-gun manifold. To use your
sprayer with a 4-gun setup, you will need to plug 1 of the
disinfectant outlets.
1. To plug a disinfectant outlet, remove elbow (44) and
replace it with plug (103). See the
4-Gun Setup
illustration on page 13.
WLD
2.
4-gun and 8-gun setups:
Follow steps 3 - 7 one
time for each 4-gun manifold. If you are using an
8-gun setup, you will have to perform these steps
twice. See the
8-Gun Setup
illustration on page 14.
3. Connect a 3/8 in. airless hose (110) to elbow (44).
4. Connect a 3/8 in. airless hose (110) to the 4-gun
manifold tee fitting (101).
5. Connect a 1/4 in. airless hose (111) to the outlet of
each ball valve (104) on the 4-gun manifold.
NOTE:
Use fitting (113) to add another 100 feet
(30.4 m) of 1/4 in. airless hose (111). Your sprayer
comes with enough hose for 300 ft (91.5 m) per gun.
You can add an additional 200 ft (61 m) for a
maximum of 500 (153 m) ft per gun.
112
111
112
106
6. Assemble the optional 1/8 in. airless whip hoses
(112) to the end of each 1/4 in. airless hose (111).
Use two wrenches to securely tighten hoses
together.
7. Insert the other end of each 1/8 in. airless whip hose
(112) through the hose guard at the base of each
spray gun (106). Use two wrenches to tighten
securely.