Operation
Operation
Operation
Pressure
Pressure
Pressure Relief
Relief
Relief Procedure
Procedure
Procedure
Follow the Pressure Relief Procedure
whenever you see this symbol.
This equipment stays pressurized until
pressure is manually relieved. To help prevent
serious injury from pressurized fluid, such
as skin injection, splashing fluid and moving
parts, follow the Pressure Relief Procedure
when you stop spraying and before cleaning,
checking, or servicing equipment.
1. Tap
to turn off the motor.
NOTE:
NOTE:
NOTE: Electric transfer pumps will
automatically turn off with the motor.
2. Tap
,
, and
to
turn off all heat zones.
3. Relieve pressure in the gun and perform
the gun shutdown procedure. See your gun
manual,
4. Engage the gun piston safety lock.
WWLL DD
The Fusion AP gun is shown.
5. Close the gun fluid inlet valves A and B.
The Fusion AP gun is shown.
6. Shut off the transfer pumps and agitator, if
used.
For
For
For pneumatic
pneumatic
pneumatic transfer
transfer
transfer pumps
pumps
pumps and
and
and agitators
agitators
agitators,
refer to your component manuals. See
For
For
For electric
electric
electric transfer
transfer
transfer pumps
pumps
pumps (if
(if
(if necessary)
necessary)
necessary),
tap
to turn off turn off the A-side
transfer pump power, and
to turn
off the B-side transfer pump power.
7. Make sure the bleed or circulation lines are
connected and routed to waste containers or
supply tanks. Turn the pressure relief/spray
valves (SA, SB) to pressure relief/circulation
. Make sure the gauges drop to 0.
WWLL EE
S
A
S
B
32
3A8500E
