Graco Reactor 2, Руководство по ремонту

Страница: 33 / 102

Troubleshooting
Error Error
Error
Location Location
Location
Type Type
Type
Description Description
Description
Cause Cause Cause Solution Solution Solution
Disconnected or
loose RTD cable or
connection. Check all wiring and
connection to RTD. T6DB Heater B Sensor Error B
Bad RTD. Switch the RTD with
another and see if the error
message follows the RTD.
Replace RTD if the error
follows the RTD.
T6DH Hose Sensor Error Hose Disconnected or
shorted RTD cable
in hose or bad FTS. Expose each hose RTD
connection to check and
retighten any loose con-
nector. Measure hose RTD
cable and FTS continuity.
See
Repair Heated Hose,
page 60 . Order RTD Test
kit 24N365 for measure-
ment.
Disconnect hose RTD and
use manual hose mode to
finish job until repair can be
completed.
Shorted RTD cable
in hose or FTS. Expose each hose RTD
connection to check for
exposed and shorted RTD
wires. Measure hose RTD
cable and FTS continuity.
See
Repair Heated Hose,
page 60 . Order RTD Test
kit 24N365 for measure-
ment.
Disconnect hose RTD and
use manual hose mode to
finish job until repair can be
completed.
T6DT TCM Sensor Error TCM
Shorted A or B
Heater RTD If the error still occurs with
the hose FTS unplugged,
one of the heater RTDs
is bad. Unplug the A or
B RTD from the TCM. If
unplugging an RTD fixes
the T6DT error, replace the
RTD.
334946C 33