Graco QED AutoPump AP4, Руководство по эксплуатации

Страница: 22 / 44

Rev 02 PN: 95358 Page | 21
Pump Technical Specifications
4” Bottom Inlet, Low Draw down
For Pumps: 302596P
Pump Dimensions, Specifications & Operating Requirements
Application Limits
AutoPump Ultra 4.0 are designed to handle the application ranges described below. For application outside of
these ranges consult QED Environmental about AP4 upgrades.
Application Limit Specifications:
Maximum Temperature: Up to 180°F (82°C)
pH Range: 2 – 12 pH
Salinity: Up to 270 ppm (150 ppm chloride) at 180°F (82°C)
Up to 405 ppm (225 ppm chloride) at 140°F (60°C)
Up to 9000 ppm (5000 ppm chloride) at 50°F (10°C)
Model 4"
– Low Drawdown AP4.0 Bottom Inlet
Liquid Inlet Location Bottom
OD 3.6 in. (9.1 cm)
Length Overall (pump & fittings) 27.4 in. (69.6 cm)
Weight 11.7 lbs. (5.3 kg)
Max. Flow Rate 7 gpm (26.5 lpm) - See Flow Rate Chart
Pump Volume / Cycle 0.11 - 0.16 gal (0.42
– 0.61L )
Min. Actuation Level 15.3 in. (39 cm)
Standard Pump
Max. Depth 250 ft. (76 m)
Air Pressure Range 5 - 120 psi (0.4 - 8.4 kg/cm2)
Air Usage 0.32-2.86 scf / gal. (2.2-21.5 liters of air
/
fluid liter) - See Air Usage Chart
Standard Construction Materials
Pump Body Fiberglass
Pump Ends 316 Stainless Steel
Internal Components 316 Stainless Steel, Viton, PVDF
Tube & Hose Fittings 316 Stainless Steel
Fitting Type Barbs or Quick Connects or Easy
Fittings
Tube & Hose Options
Tubing Material Nylon
Sizes - Liquid Discharge 1 in. (25 mm) or 1-1/4 in. (32 mm) OD
Pump Air Supply 1/2 in. (13 mm) OD
Air Exhaust 5/8 in. (16 mm) OD
Hose Material Nitrile
Sizes - Liquid Discharge 3/4 in. (19 mm) or 1 in. (25 mm) ID
Pump Air Supply 3/8 in. (9.5 mm) ID
Air Exhaust 1/2 in. (13 mm) ID