Installation
3A8622B
5
5. Successfully connecting is indicated by a
high/low/high series of beeps that indicate the data
is being sent to Pulse Level.
6. Once activated, the device uploads readings at
scheduled times, if assigned to a tank in Pulse
Level.
Beep Pattern
Mount Options
Log Device
The log device can be mounted in three ways:
1. Using the adhesive strips to attach to a flat surface.
This is typically used to vertically mount the device.
2. Using cable ties (F
. 2):
3. Using wall mount screws (F
. 3):
Beep Pattern
Definition
Beep once per second
Network registration
High/Low combination
beep
Incoming data
Low/High combination
beep
Outgoing data
Low double beep every
four (4) seconds
Network Listen
Low double beep every
two (2) seconds
Reestablish the Network
connection
High double beep every
four (4) seconds
TCP Listen
High double beep every
two (2) seconds
Reestablish TCP
F
IG
. 2
F
IG
. 3
Cable Tie Locations
Wall Mount Screw Locations