Graco Pulse 25T462 Скачать руководство пользователя страница 1

Страница: 1 / 14

3A8622B

Instruction Manual

Pulse

Level Pressure

Tank Level Monitor

Measures the fluid height using pressure to determine the volume of fluid within a tank.

For use only with Pulse Level. Intended fluids: oil, diesel, fuel, waste oil, automatic

transmission fluid (ATF), kerosene, anti-freeze, windshield washer solution, waste water,

gasoline, and DEF. For professional use only. Not suitable for tank overfill protection.

Part No. 25T462

Important Safety Instructions

Read all warnings and instructions in this

manual and in all related Pulse manuals

before using the equipment.

Save all

instructions.

This Tank Level Monitor (TLM) contains FCC ID XMR

201707 BG96. This device complies with Part 15 of

the FCC Rules. Operation is subject to the following

two conditions:

• This device may not cause harmful interference.

• This device must accept any interference

received, including interference that may cause

undesired operation.

II 1G Ex ia IIB T4 Ga

Class 1, Division 1 Gr C D

Class 1 Zone 0 AEx ia IIB T4 Ga

Содержание Pulse 25T462















Результаты поиска

Содержание Pulse 25T462

Отзывы:

Похожие инструкции для Pulse 25T462

Бренды по названию

Популярные бренды

Graco Pulse 25T462, Инструкция по эксплуатации

Результаты поиска

Содержание Pulse 25T462

Отзывы:

Похожие инструкции для Pulse 25T462

Бренды по названию

Популярные бренды