Installation
4
3A8507C
Installation Examples
Drilling
If the tank does not contain a suitable positioned
opening at the top of the tank, it will be necessary to
manually drill into the top of the tank.
1. Select a flat area on the top of the tank located
towards the center (F
. 5).
2. Drill a 1.5 in. bsp hole at the selected area using a
45.5 mm tapping drill.
3. Continue with
Operation
View Data
The TLM can be configured with the Pulse Level
(level.gracopulse.com) to take a reading at predefined
times.
After configuring the TLM using the TLM Pulse Level,
press the button until the green LED is lit, to create a
connection between the TLM and the Pulse Level to
load the configuration.
NOTE: Frequent measurements result in shorter battery
life.
Manual Measurement
To force a measurement:
1. Press and hold the button until the green light
illuminates.Release the button.
F
IG
. 5
F
IG
. 6
