Graco ProMix PD3K Plus, Операция

Страница: 76 / 122

Setup Mode Screens
Recipe Recipe
Recipe Screen
Screen
Screen 1
1
1
Figure 49 Valid Recipe Screen 1
Recipe Recipe
Recipe
Enter the desired recipe number (1-40).
Recipe Recipe Recipe 0 0 0
Use Recipe 0 to flush the system.
• If If If a a a recipe recipe recipe (1–40) (1–40) (1–40) is is is loaded: loaded: loaded: Select Recipe 0 to flush
the previously active pumps and purge the gun.
• If If If Recipe Recipe Recipe 0 0 0 or or or 61 61 61 is is is loaded: loaded: loaded: Select Recipe 0 to
flush all pumps and purge the gun.
Enabled Enabled Enabled
Selecting “Enabled” makes the selected recipe
accessible from the Spray screen on the ADM or to
the PLC.
NOTE: NOTE: NOTE: Recipe 0 is always enabled.
Component Component Component A A A Valve Valve Valve
Enter the desired Component A valve number (1-30).
NOTE: NOTE: NOTE: If you enter a number which is not valid in
your system configuration, the field will be highlighted
and the recipe becomes invalid. For example, if your
configuration has 8 color valves and you enter 30,
the field will appear as shown in the Invalid Recipe
Screen example.
Component Component Component B, B, B, C, C, C, or or or D D D Valve Valve Valve
Enter the desired component valve number (1-8).
NOTE: NOTE: NOTE: If you enter a number which is not valid in
your system configuration, the field will be highlighted
and the recipe is invalid. For example, if your
configuration has 1 catalyst valve and you enter 4,
the field will be highlighted and the recipe is invalid.
Figure 50 Invalid Recipe Screen
Drive Drive
Drive Pump
Pump
Pump
Select the component pump that will be driving
to target pressure. Most often this will be the
Component A pump because it will have relatively
high viscosity and volume compared to the other
mixing components.
Potlife Potlife Potlife Time Time Time
Enter the potlife time (0 to 999 minutes) for all or any
of the individual mixing stages of the fluid stream.
Entering 0 disables this function for that particular
mixing stage.
NOTE: NOTE: NOTE: The system will automatically detect which
fluid stream is used based on component selection
and will enable the appropriate potlife stage fields
based on the fluid stream configuration settings
entered on
System Screen 3, page 71 .
Ratio Ratio Ratio Format Format Format
Select the ratio format that most closely matches
what is shown on the material data sheets. Multiple
formats are available to simplify entering the ratio
values. The ratio value fields will automatically
update when the format is changed.
Values for the ratio fields can be set from 0.01- 100,
and percent values from 0.1% - 100.0%. A value
of 0 indicates that the component is not part of the
recipe and it will be hidden from the recipe screens.
It is extremely important to consider hose sizing
and fluid dynamics when implementing wide ratios
(50:1 – 100:1) and a relationship between any two
components should never exceed 100:1.
NOTE: NOTE: NOTE: The minimum flow requirement for any single
component in a recipe is 1 cc/min.
NOTE: NOTE: NOTE: For ratio formats in percent, the sum of the
component percentages should always equal exactly
100%.
NOTE: NOTE: NOTE: For 1K or 2K recipes, it is recommended to
use ratio format A:B:C and set the ratio values of
unused components to zero.
76 3A6287E