General Information
4
3A4346C
General Information
Each hose bundle comes with 9 air lines, a fiber optic
cable, power supply cable (ES bundles), and grounding
cable. Solventborne bundles come with an additional 3
fluid lines.
All hoses and cables are held with spiral wrap at the
applicator and controller ends of the bundle. To adjust
the hose bundle for installation, remove the two spiral
wraps to free the three fluid lines (24Z168, 24Z169,
24Z170, 24T743, 24T744, 24T745 models only) and
grounding cable.
Once all lines are adjusted, install spiral wrap back on
hose bundle. Additional spiral wraps can be purchased
in kit 24Z662 (bag of 10).
Waterborne Information
Waterborne hose bundles for electrostatic applications
can be created by purchasing hose bundle 24Z711,
24Z712, or 24Z713 along with 2 waterborne fluid hoses,
one for paint and one for dump/recirculation. See Other
Accessories for more information.
Remove the blue hose bundle cover to install the fluid
hoses and secure with spiral wrap after connecting all
lines to applicator. Complete assembly by re-installing
protective blue cover over all lines before spraying.
For non-electrostatic applications, the standard fluid
hoses for solventborne systems can be used.
Installation
Hollow Wrist Applicator Models
(RxA2xx)
All hose bundles come ready to connect to Hollow Wrist
applicators.
The hollow wrist fiber optic cable measures 1.480” ±
.005” (37.6 + 0.12 mm) (See F
. 1). The hex nut may be
used for fine adjustments to reach the target length. To
add length, turn nut clockwise.
To connect the hose bundle, see the Installation section
of ProBell Rotary Applicator, Hollow Wrist manual
334626.
F
IG
. 1 Hollow Wrist Applicator Fiber Optic Cable
Length (All Models)
