Graco NAUTILUS 65 LX, Инструкция по эксплуатации

Страница: 8 / 184

8
3. Raise Seat Back
With your other hand, raise seat back so
that both arms LOCK into the gutters. Arms
should CLICK into the gutters. Seat assem-
bly should appear as shown.
4. Attach Seat Pad Side Loops
Pull elastic loop on the seat pad through the
vehicle belt guide on side of seat and attach
to hook as shown. Repeat on other side.
Review section 2-A to see all of the features of this car seat.
The best seating location for this car seat is one that:
• Is recommended by your vehicle owner’s manual, and
• Results in a secure installation of this car seat.
Some vehicles have specific requirements for where the car seat can be installed, so
be sure to check your vehicle owner’s manual for available seating positions, if any.
For example, sometimes the center rear seat has a lap belt only vehicle seat belt,
which cannot be used when this car seat is in Booster mode.
Review section 7-B, 7-C of this manual AND your vehicle owner’s manual.
5. Remove Zip Ties
From the bottom of the seat, cut the zip ties
off. Remove the zip ties and card board.
6. Assembly Complete
Click!