Graco MAGNUM PROJECT PAINTER PLUS Скачать руководство пользователя страница 4

Страница: 4 / 4

STORAGE FLUID

Remove Power Flush attachment from suction tube.

Submerge suction tube in Pump Armor.

™

Flip Prime/Spray Valve up to

PRIME

. Turn Power Switch

. Turn Pressure Control Knob to Prime/Clean setting.

When Pump Armor

comes out of drain tube,

turn Pressure Control Knob to lowest setting

and Power Switch

OFF

Flip Prime/Spray Valve down to

SPRAY

and install

inlet strainer on suction tube for storage.

Every Graco purchase comes
with A+ Customer Service.

Questions?

(

888) 541-9788

www.magnum.graco.com/aplus

ti28249a

ti28250a

ti28255a

magnum.graco.com/p3op

3A3585 Revision A, February 2016. Original Instructions. This Quick Guide contains English.

Scan QR code for

Operational Video

Содержание MAGNUM PROJECT PAINTER PLUS

Страница 1: ...ow fire and explosion warnings as listed in your manual Turn Power Switch OFF and plug sprayer into grounded outlet Turn gun trigger lock to locked position Unthread spray tip and guard assembly Separ...

Страница 2: ...n Attach drain tube to suction tube and turn Pressure Control Knob to Spray Setting Start at lowest setting and increase until pattern is evenly distributed no gaps at edge YOU ARE NOW READY TO SPRAY...

Страница 3: ...igger lock to locked position Flip Prime Spray Valve up to PRIME Turn Power Switch OFF With the trigger lock in locked position unthread spray tip and guard assembly from gun Place in waste pail for f...

Страница 4: ...to lowest setting and Power Switch OFF Flip Prime Spray Valve down to SPRAY and install inlet strainer on suction tube for storage Every Graco purchase comes with A Customer Service Questions 888 541...