Repair
3A3169E
25
c.
Install 4 new bolts. Hand tighten the bolts (33)
evenly, each one a little at a time in a diagonal
pattern. Then torque diagonally to 10-13 ft. lbs.
(13.5-17.6 N•m). See F
d.
Apply a thin layer of grease to o-ring (4). Install
o-ring to piston stop nut (3)
e.
Thread piston stop nut (3) into top of air cylinder
(2) as shown in F
. 57. Wrench tighten nut.
Then torque nut to 15 to 17 ft. lbs (20.3 to 23.1
N•m).
10. Apply a thing layer of grease to o-ring (26). Install
o-ring (26) into groove in the pump base (1) as
shown in F
NOTE:
This is the only correct way to install this
o-ring and ensure it will not slip out of place when
the reservoir is installed over the pump base.
F
IG
. 55
F
IG
. 56
33
4
3
F
IG
. 57
F
IG
. 58
2
3
26
1
27
GL
