Graco LineLazer IV 250SPS, Руководство по ремонту

Страница: 23 / 54

Engine Replacement
3A2593C Repair 23
Engine Replacement
NOTE: For Series A, B of 24F307, 24K960, 24K961,
24K962, 24M608 and Series A of 16V470, 16V471,
16V473, 16V474, 24U561
Removal
1. Remove clutch, see Clutch Replacement, page 21.
2. Disconnect all wires from engine.
3. Remove air filter cover, element and base.
4. Disconnect throttle cable.
5. Disconnect choke cable.
6. Tie knot in rope by recoil starter to prevent rope
from being pulled into recoil starter.
7. Take rope handle apart and untie knot in recoil
starter handle.
8. Pull rope through rope guide.
9. Remove four mounting bolts from engine.
10. Remove engine. NOTE: Engine voltage regulator is
located below engine mounting plate. Remove two
screws and disconnect wires.
NOTICE
To reduce the risk of battery damage and shorts,
always disconnect NEGATIVE (black wire) first.
ti15307a
ti19186a
ti19183a
ti19185a
ti19188a
ti19187a
ti19703a