308874
10
Pinion Assembly/Rotor/Field/Shaft/Clutch
Removal
Fig. 6. If pinion assembly (88a) is attached to clutch
housing (92), do 1. through 4. Otherwise, start at 5.
1.
Relieve pressure
;
page 5.
2.
Fig. 5. Disconnect field cable (X) from pressure
control.
Fig. 5
X
8837A
3.
Fig. 6. Remove five screws (89/96) and
lockwashers (50/51) and pinion assembly (88a).
50 (LL 3900)
Fig. 6
8700A
88a
51 (LL 5900)
89 (LL 3900)
96 (LL 5900)
4.
Fig. 7. Place pinion assembly (88a) on bench with
rotor side up.
Fig. 7
E
52
50
8701A
5.
Remove four screws (52) and lockwashers (50).
Install two screws in threaded holes (E) in rotor.
Alternately tighten screws until rotor comes off.
6.
Fig. 8. Remove retaining ring (Z).
7.
Tap pinion shaft (A) out with plastic mallet.
Fig. 8
Z
A
8703A
8.
Fig.9. Use an impact wrench or wedge something
between clutch and clutch housing to hold clutch
during removal.
9.
Remove four screws (50) and lockwashers (53).
10. Remove clutch (91).
Fig. 9
53
50
91
8704A