Engine
1. Working under the mounting plate (25) of the cart, re-
move the screw (51), lockwasher (132) and washer
(50) which hold the clutch housing (61) to the cart.
See Fig. 39.
2. Still working under the mounting plate, remove the
two locknuts (40), and then pull the screws (63) out
of the base of the engine. Disconnect the red wire
from the engine lead (A). Disconnect the black and
white wires (58) from the field. Pull the wires carefully
through the grommets (24) before removing the en-
gine. See Fig. 39 and 40.
3. Lift the engine carefully and place it on a work bench.
4. Remove the
Field and Wiring Harness, Clamp
and
Clutch Housing
, as instructed on pages 36 and 37.
5. Skip ahead to
Reassembly,
page 38, Step 1.
NOTE:
All service to the engine must be performed by
an authorized HONDA dealer.
50
132
51
67
59
61
40
63
104
25
0045
Fig. 39
Fig. 40
VIEW FROM UNDER ENGINE MOUNTING PLATE
RED
TO FIELD
TO ENGINE
58
