LazerGuide 2000
Instructions
11
Using the Laser
You need two points. A starting point to position the
spray nozzle over and an ending point to stripe to.
Day Use
For day operation, the target box is placed at the far
point of your stripe to line (use two target boxes at either
end for quicker operation). You will not see the green
line along the surface you are striping during the day,
but you will see the line on the target at the far end up to
several hundred feet away.
1. Place reflective target box at your ending point (up
to 700 feet).
2. Position spray nozzle with laser over your starting
point.
3. Slightly loosen vertical adjustment knob and rotate
LazerGuide 2000 up or down until the laser stripe
on the far target is the brightest. Lock vertical
adjustment knob.
4. Start striping while keeping laser in the center of the
target box. Keep your eyes on the target, NOT on
the spray nozzle.
Night Use
For night operation, the target box is optional since you
can see the bright green line on the surface you are
striping. However, the target is useful for longer runs as
a visual tool to determine the end of the run.
1. Turn laser on. Position spray nozzle with laser over
your starting point.
2. Use the laser as your string line to connect the start-
ing point to the ending point.
3. Optional: Use the reflective target box for long dis-
tance lines.
