2
3A3158B
Step 3: Connect photo-eye to ADM
Step 4: Enable ADM unit counter
Navigate to Setup Screens. Select “Enable ADM Unit
Counter” on page 4 of System screen.
Step 5: View material log
Press
softkey on the InvisiPac Home Screen.
Verify unit counter updates properly.
WLD
Port 1
System screen
Page 4
Home Screen
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions.
This manual contains English. MM 3A3158
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2014, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revision B,
August 2015