3A3158B
EN
Instructions
InvisiPac
®
Material Tracking Kit
For professional use only.
Not approved for use in explosive atmospheres or hazardous locations.
Important Safety Instructions
Read all instructions in this manual and all warnings
and instructions in the InvisiPac system manual 333347.
Save these instructions.
Step 1: Update system software
NOTE (PC-8e systems only): Remove the blue key token 24X626 to install the update.
Re-install the blue key token after the software update.
Step 2: Mount photo-eye
Diffuse Sensor
Adjust sensitivity for proper operation
Range: 200 mm
Retro-Reflective
Sensor
Requires reflector
Range 3.5 m
Install the black token to
update the system software.
Wait until the ADM indicates
that the update is complete.
Kit 24Y162:
Install and leave the blue token
to enable material tracking.
Kit 24Y672:
